Specifications for TM1000x5ad

OWNERS MANUAL

Number of Channels:

5

Total Power (Sum of Rated Power):

1000 Watts

Rated Power (RMS Continuous Power):

100 Watts x 4 @ 4-Ohm + 400 x 1 @ 4-Ohm
100 Watts x 4 @ 2-Ohm + 600 x 1 @ 2-Ohm
N/A + 600 Watts x 1 @ 1-Ohm
200 Watts x 2 @ 4-Ohms Bridged + N/A

Bridgeable:

Yes
Front Terminals: Left (+) Right (-)
Rear Terminals: Left (+) Right (-)

Frequency Response:

20Hz - 20kHz

Input Sensitivity:

150 mV to 12 V

Circuit Topology Class:

Class AD + Class BD (Sub)

Efficiency (Average):

>85%

Signal Input:

Front High/Low Input: 4-Pin harness
Rear High/Low Input: 4-Pin harness
Input Switch: 2CH/4CH
(2CH: sub signal derived from Front Left input)

Tone Controls:

Front/Rear Treble: 0 to +14dB @ 12.5kHz (HP mode)
Front/Rear Bass: 0 to +18 dB @ 45Hz (LP mode)
Sub: 0 to +18 dB @ 45Hz

Crossover Controls:

High-Pass: 50Hz - 250Hz @ 12dB/Octave
Low-Pass: 50Hz - 250Hz @ 12dB/Octave
Subwoofer: 50Hz - 250Hz @ 12dB/Octave
Infrasonic: 28Hz @ 12dB/Octave
Butterworth Alignment on all filters

Remote Control:

Optional PLC2 provides Punch Level Control

Visual Indicators:

Power: Blue LED
Protect: Red LED
Input Clip: Red LED
Output Clip: Blue/Violet/Red LED

LED Color Legend:
BLUE: <0.5% THD
VIOLET: 1% THD
RED: 10%+ THD

Power Wire Gauge:

4 AWG

Power Input Connector:

Detachable Compression Terminal

Speaker Wire Gauge:

Front/Rear: 16 AWG
Sub: 10 AWG

Speaker Output Connector:

Front: 4-Pin Harness
Rear: 4-Pin Harness
Sub: Detachable Compression Terminal

Cooling:

Dual Fan Cooled

Dimensions (H x W x D):

1.6 x 4.3 x 12 (in.)
4.1 x 10.8 x 30.5 (cm)